10 in 1 Inflatable Backyard Water Park with Slide Bounce Zone Climbing Wall Pool

A backyard entertainment setup this loaded turns an ordinary afternoon into a full water park experience. The 10-in-1 configuration combines a water slide, bounce area, splash pool, climbing wall, basketball hoop, water gun, soccer goal, and dual pools into a single inflatable structure designed for outdoor family use on grass or soft ground.

• No dimensions provided in the source material
• 10-in-1 activity layout includes a water slide, bounce zone, climbing wall, basketball hoop, water gun, soccer goal, dual pools, and a splash pool for extended outdoor play
• Continuous-inflation design requires the included ETL-certified blower to run throughout use, with a built-in thermal overload protection that automatically shuts off and restarts the motor to prevent overheating
• Minor air seepage through sewn seams and surface bubbling in wet zones is a normal function of the pressurized construction, maintaining balanced internal air pressure for a safe jumping environment
• Ground anchoring system uses large steel ground stakes to secure the structure to lawn or soft soil during use
• Requires a minimum 2-meter clearance on all sides from fences, trees, overhead branches, electrical wires, walls, and water sources
• Intended for outdoor domestic use only on grass or soft ground surfaces — not suitable for concrete, asphalt, packed earth, wood decking, or any hard surface
• Not rated for commercial rental, public venues, use in windy conditions, or use during rain

Features

• The small holes on the product are sewn positioning points, which are unavoidable for sewn products and do not affect the quality of the products used.
• Blower should remain on and continuously inflate Water Park during use. Air flow through seams is normal. The blower meeting ETL certification. There is a temperature control device in the blower, so when the blower overheats, it will automatically stop working, and when its temperature is normal, it will work again. Thank you.
• It is normal to see bubbles rising on the surface of the pool and other wet areas of the bouncy castle (water park). During use, the blower will need to work continuously and the seams will ‘bubble’ (every product is tested for functionality prior to packaging, and it is normal for seams to seep air and water into the seams of sewn products).
• It is common and essential that a small amount of air escapes from the seams, this release helps to maintain a balanced air pressure within the inflatable structure to ensure a safe and enjoyable jumping experience for your child.
• Use of space: lawn soft ground. The use of the process is shown in the following chart (the manual has a detailed analysis): the water slide / trampoline flat - - long air cylinder tied to the blower (inlet cylinder) - - the short air cylinder (outlet cylinder) tied to the blower - - open the blower - - the castle with the auxiliary package of large earth nails fixed on the lawn - - (water slide installation of water pipes) - - start using (strictly prohibited windy days and rainy days).
• Falls onto hard surfaces can result in head or other serious injuries. Never place on concrete, asphalt, wood, packed earth, or other hard surfaces. Carpet over hard floors may not prevent injury.
• Only for domestic use. Intended for outdoor domestic family use only. Not for use in public areas or as a rental.
• Product should never be dragged across concrete, pavement or other rough surfaces.
• Do not set up in windy or rainy conditions: sudden gusts of wind may lift the product off the ground.
• Make sure the area around the product is secure.Minimum clearance zones: Place at least 2m/6.56ft away from any other objects. Objects to be avoided include but are not limited to fences, buildings, trees, overhead branches, laundry lines, electrical wires, walls, or bodies or sources of water.